A control development project team was formed at Fuji Tsushin Ki Seizo Co., Ltd. (now Fujitsu Ltd.)
Successfully developed the first NC and servo system in Japan's private sector
Delivered the first commercial FANUC NC machine to Makino F. Manufacturing Co., Ltd.
Completed Japan's first continuous cutting NC.
Completed the first electrical and hydraulic pulse motor.
Completed the first open-loop NC for continuous cutting.
Completed the first linear cutting NC that sparked a historic boom.
Granted Siemens AG of West Germany a license to manufacture and sell pulse motors.
Completed the world's first fully IC-based NC.
Completed the world's first practical group management system.
Completed the fully modular NC.
Moved Fujitsu Ltd.'s computational control division manufacturing plant from Kawasaki, Kanagawa Prefecture to Hino, Tokyo (later the site of Fujitsu Fanuc Co., Ltd.).
Moved Fujitsu Ltd.'s computational control division research division to Hino, Tokyo.
NC division separated from Fujitsu Ltd. and established Fujitsu Fanuc Co., Ltd. with capital of 2 billion yen.
Announced CNC.
Developed NC drill.
Developed robot and introduced it into the company.
President Kiyoei Inaba (at the time) received the Joseph-Marie Jacquard Award from the American NC Association.
Started manufacturing and selling DC servo motors under a licensing agreement with Gates Inc. in the United States.
Completed wire-cut EDM machine.
Signed a mutual assistance agreement covering sales and technology with Siemens AG in Germany.
Established General Numeric Corporation in the United States through a joint investment with Siemens AG.
Listed on the Second Section of the Tokyo Stock Exchange
President Kiyoe Inaba (at the time) received the SME Engineering Citation Award from the Society of Manufacturing Engineers
President Kiyoe Inaba (at the time) was awarded the First Class Order by the Bulgarian government
Established an Automation Research Institute in the Hino area
Established the local subsidiary FANUC AMERICA CORPORATION in the United States
Commenced mass production and shipment of robots (ROBOT-MODEL 1)
Established the joint venture KOREA NUMERIC CORPORATION through a joint investment with Korea Kasei Machinery Co.
Established FANUC EUROPE S.A.
Established the FANUC-MACHINEX JOINT OFFICE in Bulgaria
Established FANUC U.K. LIMITED
Established FANUC GERMANY GmbH
Constructed and relocated a robot and NC machine tool manufacturing plant to the headquarters area (Ninno-mura, Yamanashi Prefecture)
Completed the Fuji plant, enabling unmanned nighttime machining
Changed and established the Bulgarian FANUC-MACHINEX LTD from the FANUC-MACHINEX JOINT OFFICE
President Kiyoe Inaba (at the time) received the Purple Ribbon Medal from Emperor Showa
Made FANUC Partonics Co., Ltd. a subsidiary
Established FANUC MECHATRONICS S.A. in the Principality of Luxembourg
Established a Technical Training Center
Established GMFanuc Robotics Corporation through a joint investment with General Motors of the United States
Established 600 FANUC ROBOTICS LIMITED in the United Kingdom through a joint investment with the 600 Group
On November 26, His Royal Highness Prince Henri of the Grand Duchy of Luxembourg inspected our Fuji Complex.
On July 11, His Majesty inspected our Fuji Complex when he was Crown Prince.
Constructed the main building, CNC factory, industrial machine factory, and basic research institute in the headquarters area.
Relocated headquarters from Hino City, Tokyo to Nino Village, Nanto District, Yamanashi Prefecture.
Completed the fully electronic plastic injection molding machine FANUC AUTOSHOT.
Completed the FANUC Series 0.
President Kiyoe Inaba (at the time) received the Order of the Crown of the Grand Duchy of Luxembourg.
Constructed the Central Technical Center, dedicated robot assembly factory, and production technology research institute in the headquarters area.
Signed the basic agreement for establishing a joint venture with General Electric in the field of factory automation.
On October 13, Emperor Showa visited the headquarters.
Established GE Fanuc Automation Corporation through joint investment with General Electric of the United States, and subsequently established its subsidiaries GE Fanuc Automation America, Inc. and GE Fanuc Automation Europe S.A.
Established a local corporation in Taiwan, Taiwan Fanuc Co., Ltd.
Completed the digital servo.
President Kiyoe Inaba (at the time) received the J.F. Engelberger Award for Technical Development from the American Robotics Association.
Established the Health Management Center and the Open Country History Museum.
President Kiyoe Inaba (at the time) received the M. Eugene Merchant Manufacturing Medal from ASME/SME of the United States.
Developed a carbon dioxide laser.
Moved the Product Development Research Institute to the headquarters area.
Established a laser research institute in the headquarters area.
President Kiyoe Inaba (at the time) received the Order of the Blue Ribbon from His Majesty.
Established a local subsidiary, FANUC EUROPE GmbH, in Germany.
Established a monument commemorating Emperor Showa's visit (the name of the pavilion is Akebono Hall).
System factory completed.
Constructed a Falcon factory in Kagoshima Prefecture.
President Kiyoeemon Inaba (at the time) was elected as a foreign member of the U.S. Academy.
Divided the Product Development Research Institute into four institutes: CNC Research Institute, Servo Research Institute, Robot Research Institute, and Robo Machine Research Institute.
Established a joint venture, FANUC INDIA PRIVATE LIMITED.
Made GMFanuc ROBOTICS CORPORATION a wholly-owned subsidiary and renamed it FANUC Robotics Corporation (along with converting FANUC Robotics America Corporation and FANUC Robotics Europe S.A. into subsidiaries).
Established Beijing Fanuc Electromechanical Co., Ltd. in China through a joint investment with the Beijing Machine Tool Research Institute of the China Machinery & Electronics Industry Department.
The Hereditary Prince Henri of the Grand Duchy of Luxembourg visited our company.
Established Datong Fanuc Automation Co., Ltd. in Taiwan through a joint investment with Datong Co., Ltd. and GE Fanuc Automation Corporation.
Established Fanuc GE Automation Singapore Pte. Ltd. in Singapore through a joint investment with GE Fanuc Automation Corporation.
Chairman Kiyoeemon Inaba (at the time) received the Second Class Order of the Rising Sun from His Majesty the Emperor.
Established a service call center.
Prime Minister Mahathir of Malaysia visited our company.
A new servo motor factory began operation in the headquarters area.
Established Shanghai Fanuc Robotics Co., Ltd. in China through a joint investment with Shanghai Electric Group.
Made Korea Fanuc Co., Ltd. a subsidiary.
Made Fanuc Servo Co., Ltd. a subsidiary.
President Bagabandi of Mongolia visited our company.
Mass production shipment of Series CNC begins.
The Emperor and Empress visited together with the Grand Duke of Luxembourg and his consort.
Sheet metal factory and Natural History Museum completed.
FANUC Welfare Pension Fund established.
FANUC INDIA PRIVATE LIMITED became a subsidiary.
Chinese Premier Zhu Rongji visited our company.
Completion of new industrial machine factory and kitchen center
Robot cell operationalization, capable of 720 hours of unmanned operation
Established FANUC VIETNAM LIMITED
Established joint venture FANUC Mitsui Automation CIS LLC in Russia
Mass production shipment of intelligent robots begins
Mass production shipment of Series CNC begins
On May 20, the Crown Prince inspected our company
The Crown Prince inspected our company.
New building constructed for RoboShot Research Institute in headquarters area
Reorganized European service and sales (robot machine) structure, established FANUC EUROPE GmbH to oversee services and FANUC ROBOMACHINE EUROPE GmbH for sales
Reorganized GE Fanuc Automation Europe S.A., established Fanuc GE CNC Europe S.A. as a business company for CNC systems
Established FANUC CZECH s.r.o.
Opened Nagoya branch
Constructed new servo motor factory in headquarters area
Established joint venture FANUC ROBOSHOT EUROPE GmbH
Completion of new molding factory
Established FANUC HUNGARY SERVICE and FANUC ROBOMACHINE FRANCE
FANUC EUROPE SERVICE GmbH renamed to FANUC EUROPE GmbH
Established FANUC SOUTH AMERICA SERVICE LTD
Renamed GE Fanuc Automation Americas, Inc. to GE Fanuc Intelligent Platforms, Inc.
FANUC FA Service Co., Ltd., FANUC Robot Service Co., Ltd., and FANUC Laser Service Co., Ltd. merged to form FANUC Service Co., Ltd.
Establishment of FANUC POLAND SERVICE LTD
Establishment of FANUC NORDIC SERVICE AB
Completion of the cut factory at Tsukuba Factory (Akebono Sugi Factory) and Nagoya Technical Center
FANUC Mitsui Automation CIS LLC was made a wholly-owned subsidiary and renamed to "FANUC AUTOMATION" LLC
FANUC SWITZERLAND SERVICE GmbH established
Completion of FANUC's Roman bath
Construction of a new machine processing factory in the Tsukuba area
Construction of a new CNC factory in the headquarters area
FANUC ROBOSHOT EUROPE GmbH was made a subsidiary
Dissolved the joint venture with General Electric. Accordingly, reorganized the companies handling CNC sales and services in the United States and Europe, establishing FANUC FA AMERICA CORPORATION and FANUC FA Europe S.A.
Commencement of mass production shipment of parallel-link type Genko robot
FANUC FA Europe S.A. absorbed FANUC EUROPE GmbH
FANUC ROBOMACHINE EUROPE GmbH absorbed FANUC ROBOSHOT EUROPE GmbH
Construction of a new robot factory in the headquarters area
Establishment of FANUC Health Insurance Association
Construction of a new robot drill factory in the Tsukuba area
Integrated FANUC Robotics Europe S.A., FANUC FA Europe S.A., and FANUC ROBOMACHINE EUROPE GmbH, establishing FANUC Europe Corporation
Integrated FANUC Robotics America Corporation and FANUC FA AMERICA CORPORATION, establishing FANUC America Corporation
Acquired factory land in Mibu Town, Tochigi Prefecture
Completion of collaborative robot CR-35 A
Development of fiber laser
200,000 RoboDrill units shipped in total
400,000 robot units shipped in total
Establishment of FF Laser Co., Ltd.
Announced collaboration with Preferred Networks
Collaborative robot CR-35 iA completed.
50,000 RoboShot units shipped in total
3,600,000 CNC units shipped in total
Reliability Evaluation Building and Performance Evaluation Building completed
Mibu factory completed
500,000 robot units shipped in total
Fanuc Academy completed
New robot factory built in the Tsukuba area
The new company SHANGHAI-FANUC Robomachine Co., Ltd. took over the robot machine division from SHANGHAI-FANUC Robotics Co., Ltd., and began operations as a new consolidated subsidiary.
Establishment of Fanuc Advanced Technology Research Institute
New Nagoya Service Center opened
New RoboNano factory built in the headquarters area
Founder, Honorary Chairman, Doctor of Engineering, Seiuemon Inaba, passed away