Administrative BPO servicesEngineering consultingProduct servicesStaffing agencyHardware support servicesSoftware utilization and system development supportSales of IT-related products and service supportContainer ship planningContract software developmentCloud-based access solutions servicesImport and sales of electronic and electrical machinerySale, rental, installation, and maintenance of hardware and softwareProcurement and sales of electronic and electrical machinery such as smart locksMarketing research in the United States
Names without a link are companies not yet registered in OpenBizGraph
§05
Network
NETWORK
Loading the relationship graph...
Drag to move · click to open
§06
History
32 EVENTS
It was a university-originated venture company founded by Shota Hattori, who was involved in structural design research as an assistant in the laboratory of Professor Tadashi Taniguchi of the Department of Architecture at Tokyo Institute of Technology. He brought a drawing board into his home reception room at 1-768 Kamiozaki, Shinagawa-ku, Tokyo, starting with just himself and one other person, totaling two. After growing to about ten people in two years, they rented a house next to his home and expanded the office.
Founded the Masaru Hattori Structural Planning Institute. It is a university-originated venture company established by Masaru Hattori, who was involved in structural design as an assistant in Professor Tadashi Taniguchi's laboratory at Tokyo Institute of Technology. Started with a drawing board in the home reception room at 1-768 Kamiosaki, Shinagawa-ku, Tokyo, with Masaru Hattori himself and one other person, totaling two. After increasing to about ten people in two years, the company expanded by renting a house next to his home.
Wanting to serve as a bridge to return university research results to society, the company was established as Structural Planning Laboratory Inc. Soon after founding, Shota Hattori, who read about structural calculations using computers in a conference journal published in the United States, recognized its great potential and traveled to the U.S. with dreams of computers.
Established Structural Planning Institute Inc. Aiming to give back university research results to society, the company was founded. Soon after its founding, Masaru Hattori, who read an article about structural calculations using computers published in a conference journal in the United States, recognized its great potential and traveled to the U.S.
From the late 1950s to the early 1960s, a reconstruction boom of castle keeps swept across Japan as a symbol of postwar reconstruction. Under the guidance of Professor Michio Fujioka, a specialist in Japanese architectural history, he was involved in structural design of many castles including Wakayama Castle, Kumamoto Castle, and Odawara Castle, contributing to castle reconstruction nationwide. Castle restoration involved working amidst many cultural assets such as stone walls and moats that required careful preservation, demanding complex, specialized skills and high technical ability.
Supporting Kei Ando, who transferred from IBM Japan to Fujitsu, and supporting the development of Fujitsu's FACOM series, a pioneer of domestically produced computers, including assisting with the development of operating systems (OS) with Toshiro Ikeda, a university senior of Hattori. In 1969, they introduced FACOM 230/60 within the company, contributing to the development of domestic computers.
Boom in the reconstruction of castle keeps. As symbols of post-war reconstruction, a boom in rebuilding castle keeps swept across Japan. Designed structures for Wakayama Castle, Kumamoto Castle, Odawara Castle, and others, and was involved in castle reconstruction nationwide.
With the dream and mission to eliminate the busyness of structural design work and focus on more valuable tasks, Shota Hattori traveled alone to the University of Illinois to Professor Newmark in 1960. Soon after returning, he pioneered the introduction of the latest digital computer IBM 1620 in the industry. The rental fee alone was 600,000 yen per month, at a time when the starting salary was 12,000 yen. Handling expensive computers also required fire insurance, leading to the relocation of the headquarters from a wooden building to a reinforced concrete building in Taito-ku, Torigoe.
Introduction of IBM 1620. Masaru Hattori went to the U.S. in 1960 and immediately after returning, realized the latest digital computer IBM 1620. The rental fee alone was 600,000 yen per month, and the headquarters was relocated to a reinforced concrete building for fire insurance.
With the introduction of IBM 1620-II, the company moved to the 'Japan Holstein Hall,' which was responsible for structural design, as a space suitable for installing computers.
Relocated the head office to Holstein Hall in Nakano Ward, Tokyo. Moved in with the space for installing computers following the introduction of IBM 1620-II.
We have developed a three-dimensional frame structure analysis software "STAN" used for structural design and analysis consulting work, utilizing large-scale computers introduced. We continue to improve and develop the software to match the times, which has led to the development and sale of current PC software packages.
Development of the "STAN" structural analysis software. Developed a three-dimensional frame structure analysis software "STAN" for structural design and analysis consulting work, using the introduced large-scale computer.
To expand the sales of our self-developed software "STAN" in the United States and gather the latest information, we participated financially in San Francisco's International Logic Cooperation "ILC". At the same time, we started commissioned software development. There are reports in newspapers at the time that it was "noted as opening the way for the export of intangible products selling brains." It was a challenge in the United States, where the software market in Japan was not yet mature.
Established ILC in the U.S. To expand sales of our self-developed software "STAN" in the U.S. and gather information, we participated financially in San Francisco's International Logic Cooperation "ILC". At the same time, we started commissioned software development.
In the 1970s, small mini computers that could be handled by laboratories and small to medium-sized enterprises appeared, replacing large mainframe computers occupying floors of buildings. Masaru Hattori, who saw potential in this computer, established Japan Mini Computer Corporation, a government-affiliated company, together with Masahiko Hiramatsu, then the director of the Information Processing Promotion Division of the Ministry of International Trade and Industry (later governor of Oita Prefecture). The mission of the company at the time of establishment was "to develop and manufacture Mini Computers as components that realize their needs as much as possible, together with like-minded people, and to contribute to each company's original work with confidence." There is a statement in the establishment document of that time.
Established Japan Mini Computer (later Japan Data General). With the advent of small mini computers, established Japan Mini Computer Corporation, a government-affiliated company.
Establishment of Japan Software Industry. Aiming to establish software technology, led industry development as chairman of the Japan Software Industry Promotion Association.
In 1974, our company's Operations Research (OR) laboratory was established. Although initially engaged in structural design, Masaru Hattori always had a strong desire to "create an organization of engineers engaged in comprehensive engineering that can address any social problem". In 1963, he attended the international OR conference held in Oslo, Norway, as Japan's representative along with Professor Takehiko Matsuda of Tokyo Institute of Technology. From early on, he was considering challenging fields other than structural design using computers.
Challenge to fields other than structural design. The Operations Research (OR) laboratory was established. Attended the international OR conference held in Oslo, Norway, as Japan's representative. Established Kumamoto Structural Planning Institute in Otsu Town, Kumamoto Prefecture.
Development of solutions for manufacturing industries. Started deploying CAD and simulation software not only for the construction industry but also for manufacturing industries.
Entering the decision-making field. Expanding into social activity analysis and simulation, introducing marketing consulting and computer interviews.
Hosting the 'Software Package Show'. Held at the Shinjuku Century Hyatt Hotel to commemorate the 30th anniversary.
Participated in the Roppongi Hills project of Mori Building in 2002.
Participated in the Mori Building Roppongi Hills project.
In 2007, we opened an office for structural design in Shanghai and were involved in the Shanghai Global Financial Center project.
Opened a structural design office in Shanghai and was involved in the Shanghai Global Financial Center project.
Completed the Chisui Museum. Developed and commercialized the world's first 3D seismic isolation device, receiving the Japan Architectural Institute Award and the Japan Seismic Isolation Structure Association Technical Award.
Entered the cloud business. Started offering SendGrid, NavVis, and RemoteLOCK.
Transitioned to a company with a Nomination Committee, etc.
Established Structural Planning Research Institute Holdings and transitioned to a holding company system. Aiming to continue challenging solving unknown societal issues and sustainably expanding value.
Date of establishment: July 1, 2024.
§07
News
12 ARTICLES
Receipt of Appreciation Letter at the Housing and Living Monthly Award Ceremony
The Structural Planning Research Institute received an appreciation letter from the Housing Bureau Director at the 38th Ministry of Land, Infrastructure, Transport and Tourism "Housing and Living Monthly" award ceremony, thanks to its technical support for the restoration of the NTT Aomori Hachinohe Building Tower. By conducting structural analysis of the damaged tower, the institute confirmed that there was no risk of collapse from subsequent seismic activity, and contributed to shortening the evacuation orders and traffic restrictions by about two weeks earlier than initially expected.
High-Resolution NavVis VLX 4 3D Laser Scanner Now Available in Japan
Kozo Keikaku Engineering Inc. has begun domestic sales of the NavVis VLX 4 wearable 3D laser scanner, developed by Germany’s NavVis. Equipped with three LiDAR sensors and 3 mm point-cloud resolution, it captures fine details with high accuracy. The scanner is expected to see broader use in architecture and manufacturing.
KKE Begins Sales of NavVis CLX Handheld 3D Laser Scanner
KOZO KEIKAKU ENGINEERING Inc. began domestic sales on September 8, 2026, of the NavVis CLX handheld 3D laser scanner developed by NavVis GmbH. The compact, lightweight entry model delivers high-accuracy measurements with an initial cost of ¥2.98 million (excluding tax), supporting everyday use of 3D data across a wide range of sites. It is scheduled to be unveiled in Japan at KKE NavVis Summit Japan 2026 on October 16.
FY2026 Earnings Presentation Materials Published
Materials from the earnings briefing held on August 21, 2026, have been published. They contain information on results for the fiscal year ended June 2026. See the materials for details.
Investment in U.S. RemoteLock and Accounting Treatment
Kozo Keikaku Engineering Holdings Co., Ltd. invested US$2 million in a convertible note issued by U.S.-based RemoteLock and recorded an investment loss under the equity method. The investment supports working capital and business growth as RemoteLock seeks to become profitable in the first quarter of 2027.
NavVis completes Series D round and converts funding into equity
Kokoro Kikai Research Institute Holdings Co., Ltd. reported that German company NavVis completed a Series D round raising $85 million. The funding round included participation from TJC and other investors, and the investment and equity conversion procedures for the company were advanced.
KKE Vision for Manufacturing 2026 Announcement
Structural Planning Laboratory Inc. will hold an event on July 23, 2026, themed around the future of manufacturing industries to survive in the AI era.
Structural Planning Institute Wins Education Award with 'MystructureNote'
The educational practice utilizing the interactive structural calculation notebook app 'MystructureNote' provided by Structural Planning Institute Co., Ltd. received the Japan Society of Civil Engineers Education Award (Education Contribution).
Exhibition Planning Implementation After the Midterm Financial Results Briefing for June 2026 Fiscal Year
Kozō Planning Research Institute Holdings conducted an exhibition planning after the midterm financial results briefing for the June 2026 fiscal year.
Start of Road Monitoring Pilot Project in Collaboration with Kanto Bus
The Structural Planning Institute Co., Ltd. and Kanto Bus have launched a pilot project for road monitoring using route buses in the Tokyo metropolitan area, aiming to detect early signs of surface changes and dangerous sinkholes.
§08
Public records
GOV
National Tax Agency basic information5011201025607
Source: National Tax Agency Corporate Number Publication Site, basic three items
Trade name
株式会社構造計画研究所ホールディングス
Trade name (kana)
コウゾウケイカクケンキュウショホールディングス
Name in English
Corporation type
301
Address
〒164-0012 東京都中野区本町4丁目38番13号日本ホルスタイン会館内
Postal code
1640012
Prefecture code
13
City code
114
Address outside Japan
Prefecture in English
City in English
Address outside Japan in English
Corporate number assignment date
2024-07-03
Update date
2024-07-03
Change date
2024-07-03
Registry closure date
Reason for registry closure
Successor corporate number
Details of the change
Latest record
1
Excluded from search
0
Processing type
01
Correction type
0
Trade name image ID
Address image ID
Sequence number
1960339
METI gBizINFO5011201025607
Source: gBizINFO (Ministry of Economy, Trade and Industry)